A Newspaper conglomerate has decided to provide network connectivity for three branches within the organization. Each branch is to have one LAN. CeltB and CeltC routers are completely configured. The CeltA router has been configured completely except for the routing protocol. Configure routing protocol RIP on the CeltA router. The routers have been configured with the following specifications. The routers are named CeltA, CeltB and CeltC. RIP is the routing protocol. The clocking is provided on the Serial 0 interface. The secret password on the CeltA router is "cisco". The subnet mask on all interfaces is the default mask.

Tips: Use Host B to connect to the CeltA router. Toggle F11 to access/exit fullscreen mode. Successful Lab Completion You will not be told this on the actual exam but you have successfully completed the Lab. Good job! ? - Lab Help Configure RIP routing protocol? Think "classful" -- what class are we working on? What networks are directly connected to the CeltA router? Class C address -- network portion only - first 3 octets. Write down: CeltA Host B (serially connected to CeltA) PW: cisco RIP E0: 192.168.149.1 S0: 192.168.199.1 Write down router RIP statements for the two networks directly attached to the CeltA router: router rip network 192.168.149.0 network 192.168.199.0 Remember -- we are only interested in the Class C network addresses - first 3 Octets. Now input your statements into the Command Line Interface. No matter what -- if you go over 15 minutes on an actual exam Lab - get to the "Privilege EXEC mode" prompt and input "copy run start".