CLI - User EXEC Mode
Command	Description
access-enable	Creates a temporary access list entry.
atmsig	Executes ATM signaling commands.
cd	Changes the current device.
clear	Resets functions.
connect	Opens a terminal connection.
dir	Lists files on a given device.
disable	Turns off privileged commands.
disconnect	Disconnects an exisiting network connection.
enable	Turns on privileged commands.
exit	Exits for EXEC mode.
help	Gets a description of the interactive help system.
lat	Opens a LAT connection.
lock	Locks the terminal.
login	Logs in as a particular user.
logout	Exits EXEC mode.
mrinfo	Request neighbor and version info from a multicast router.
mstat	Shows statistics after multiple multicast traceroutes.
mtrace	Traces reverse multicast parth from destintion source.
name-connection	Names an existing network connection.
pad	Opens an X.29 PAD connection.
ping	Sends echo messages.
PPP	Starts IETF Point-to-Point Protocol (PPP).
pwd	Displays current device.
resume	Resumes an active network connection.
rlogin	Opens an rlogin connection.
show	Shows running system information.
slip	Start Serial-Line IP (SLIP).
systart	Displays information about terminal lines.
telnet	Opens a Telnet connection.
terminal	Sets terminal line parameters.
tn3270	Opens a TN3270 connection.
traceroute	Sets a traceroute to the destination.
tunnel	Opens a tunnel connection.
where	Lists active connections.
x3	Sets X.3 parameters on PAD.
xremote	Enters Xremote mode.

BSIG:

CLI (Command Line Interface) Command Set