Kelly Computer Stores has a network configured based on the schema below. Each location consists of one LAN and all routers are completely configured and in full working order except the routing protocol on the 198.150.13.0/24 and 223.11.34.0/30 networks on Galway router. Please configure the routing protocols on the Galway router interfaces. The routers have been configured with the following specifications: The routers are named Gawlay, Limerick and Dundalk. OSPF is the routing protocol within a single area. The clocking is provided on the Serial 0 interfaces. The secret password on all routers is "cisco".

Inside Tips: This question is very precise - you do not need to access any router other than Galway. If you are clueless on classless routing protocols -- it is time to hit the books. You cannot hope to complete this lab unless you understand subnetting as it applies to classless protocols. Write down the configs including the password for the Galway router along with a brief outline of the question. Do the subnet calcs for the appropriate routing protocol prior to accessing the CLI. Remember that "show running-config" is your friend and as always - end with "copy running-config startup-config". There are several "show" commands within the exam CLI that you can use to check or verify your work. I stuck with "show running-config" as it returns everything I really need to know for this question. Finally, they may or may not give you a process-id. I decided on "100".